Media Player 4 Museum

A minimalistic, Open Source Video Player.

Extended Documentation / HowTo

What hardware to use

Since almost all Raspberry Pi use the same engine for video playback, it does not really matter which of them you buy. I suggest to use the A+ which comes in a small form factor but still features standard USB and HDMI connections. I would not buy any of the more expensive ones unless they will be used for other purposes as well.
The (micro) SD card can be any card that is 4 gigabytes or more in size. A fast card will allow the player to boot more quickly, but since it runs a read-only filesystem and basically stops using the SD card after booting, you could also buy the cheapest you can get.
As for the USB memory to play back from, the same rules apply. Buying a more expensive one will allow you to store files quickly, but for playback, even the cheap ones will deliver 2-3 megabytes per second, which is enough for the usual data rates of HD video.
Power source should be the original Raspberry, or a good quality tablet charger, i use Samsung or Apple. It is not only about the amps the supply delivers, also the quality or stability (so to say) of the voltage matters. The operating system icon for insufficient power, which by default would indicate problems, is disabled. I suggest to do a 24h test before installing just to be safe.

Prepare your SD card with the software

Insert the (micro) SD card into your computer’s card reader. Use your favorite software to write the image onto the card, as described HERE. The card will not boot if you just copy the image onto the drive! If the image was written properly, a drive called boot should show up.

Building the optional case

If you want to use the A+ hardware, and make a nice case for it just like i did, you can download the models for printing the plastic case. 3D-Print the big parts in your favorite color, and check if the hardware fits nicely with all ports freely accessible. The (optional) small piece, which should be printed in clear or transparent plastic, is used to cover the LED opening on the side. It might need some glue to stay in place.
If not done yet, insert the micro SD card into the Pi. Then, install the board inside and close the lid. Use four M3 counter-sunk screws with a length of XX mm to secure the lid, which will also keep the board in place.

How to encode your media

First of all: Do not use Adobe products to encode your files! Somehow they screw it up. If you experience freeze, stutter, white or green flicker, you know why.
I strongly suggest to use the open source software Handbrake, available for Windows, Mac and Linux. There are plenty of presets to start with, to get a reasonable file size while preserving image quality.
Export from your editing or compositing tool in a production codec like DNX or ProRes, and then use Handbrake to encode to MP4.

Setup Version 3

Start with formatting your USB memory using FAT32 (maximum file size is 4gig), ExFAT, NTFS or HFS (Apple). This depends on what operating system you use.
Copy your encoded media onto the drive. Playback will be done ordered A to Z, so you can arrange a playlist using numbering or letters at the beginning of filenames. Eject properly and put the USB memory into your Raspberry Pi.
Connect your Raspberry Pi to a screen or projector, and power it up. It will show the intro screen, which features a bit of sound (an analog projector starting up) and an orange marker in each corner. If you cannot see the corners, or there is black screen between markers and the screen bezel, the screen crops or resizes your image, which might be an issue, depending on what your content is.
After the intro screen has passed, the player will start with your content, and loop alls files.
There is no shut down necessary, so you can simply unplug, or use a timer for operation.

Setup Version 2 or 1

The earlier versions of MP4Museum will only accept USB memory formatted as FAT32, which means file size should be 4 gigabytes or less. Copy your files onto the memory stick and connect it to your Raspberry Pi. Connect the Pi to a screen or projector and power it up.
After booting up, it will start playing your files. The order of playback depends on how your operating system has organized the list of files, so it might be A-Z, it could be the order of copying, or something else. It will then start to loop in that arrangement.
There is no shut down necessary, which means you can unplug to stop, or use a timer to control playback hours.

Option: Skip current file / Restart file

Sometimes your setup might need to provide a button to control playback. So far, there has been one function included in MP4Museum, which on the users request will terminate the player.
This function can be used to either skip to the next file in a list of files, or restart playback, if only one file is played back.
To build the hardware, you will need a standard button (closing the circuit while being pressed), some wire and a resistor. I would not recommend to solder to the board directly, but to use a connector instead. Connect the parts according to the diagram, and your ready to go ... skip!

 

Download as PDF

A project by Julius Schmiedel. Based on open source software and technology.